- Vcds Lite Interface Not Found Windows 7
- Vcds Usb Interface Not Found Windows 7
- Vcds 12.12 Interface Not Found Windows 7
I downloaded VCDS-Release 11.11.3 and tried using my Vag-Com cable to connect to my '06 VW Jetta. I was able to select USB and test, but the test failed. It said that it found the USB, but it could not find the interface. When I have the PC plugged in, the LED light on the dongle is green, but was red before that. Driver For USB KKL VAG-COM 409.1 Compatible Interface For VW/AUDI/SEAT/SKODA (120CM-Length) Device. Drivers for Operating System(s) Windows 98. Windows XP 32bit. JUMP TO DRIVERS DOWNLOAD. Basic Specs: Model: V580; Designed. Free autocad 2010 serial number and product key.
Vcds Lite Interface Not Found Windows 7
License key for office 365. Compatible product: vag kkl 409.1 obd2 usb diagnostic interface cable 1. Go to and download the vcds lite software and the drivers (cdm v2.08.30 whql certified windows drivers) 2. Now plug the vag com 409.1 usb cable into your pc. Windows will automatically detect the interface and attempt to find the correct drivers. The solution for 'Interface Not Found ' Kindly note: this technical support only work for VCDS VAG COM Original Support Update Version. VCD-S 19.6 Interface Problem & Solution: Problem 1: Problem 2: I nterface not Found/This function request license interface. Solution: VCD-S 20.4.2 VAGco.m K+Can USB Interface: 1. Software Version: 19.6 (for.
JamJay
California Bound
- Feb 11, 2008
- 4,544
- 2
- The Surrey Hills, Sweden & San Diego CA
Vcds Usb Interface Not Found Windows 7
- Vcds Lite Interface Not Found Windows 7
- Vcds Usb Interface Not Found Windows 7
- Vcds 12.12 Interface Not Found Windows 7
I downloaded VCDS-Release 11.11.3 and tried using my Vag-Com cable to connect to my '06 VW Jetta. I was able to select USB and test, but the test failed. It said that it found the USB, but it could not find the interface. When I have the PC plugged in, the LED light on the dongle is green, but was red before that. Driver For USB KKL VAG-COM 409.1 Compatible Interface For VW/AUDI/SEAT/SKODA (120CM-Length) Device. Drivers for Operating System(s) Windows 98. Windows XP 32bit. JUMP TO DRIVERS DOWNLOAD. Basic Specs: Model: V580; Designed. Free autocad 2010 serial number and product key.
Vcds Lite Interface Not Found Windows 7
License key for office 365. Compatible product: vag kkl 409.1 obd2 usb diagnostic interface cable 1. Go to and download the vcds lite software and the drivers (cdm v2.08.30 whql certified windows drivers) 2. Now plug the vag com 409.1 usb cable into your pc. Windows will automatically detect the interface and attempt to find the correct drivers. The solution for 'Interface Not Found ' Kindly note: this technical support only work for VCDS VAG COM Original Support Update Version. VCD-S 19.6 Interface Problem & Solution: Problem 1: Problem 2: I nterface not Found/This function request license interface. Solution: VCD-S 20.4.2 VAGco.m K+Can USB Interface: 1. Software Version: 19.6 (for.
JamJay
California Bound
- Feb 11, 2008
- 4,544
- 2
- The Surrey Hills, Sweden & San Diego CA
Vcds Usb Interface Not Found Windows 7
Vcds 12.12 Interface Not Found Windows 7
I started from scratch and plugged my non-genuine cable into my laptop, Windows 7 searched the internet for a driver and found one, presumably from Ross Tech. Once the driver had installed it assigned it to COM3 which is not in use by anything else. I right-clicked the VCDS lite icon and selected 'compatibility', from that I set permission to the application as administative, applied and okayed it. I then connect the cable to the car and turn on the ignition, the cable lights up blue to indicate a connection has been established so I open op VCDS and test the connection to COM3, I then get this error. I've tried changing the COM to 1/2/4 also and still I get the same result which ever way, I have also tried all of the different USB ports on my laptop, installing the driver for each but again the same error message.
I then uninstalled all VCDS drivers and VCDS. I redownloaded it and installed the driver that comes with the software this time but once everything is up and running, the same error all over again.
My understanding of the error message is that the interface cable is connected to the right port however VCDS cannot establish a connection to the car or perhaps it just doesn't recognise the cable anymore. I bought this cable some time ago and ran it on Win XP, everything ran fine then with no issues at all so the car definitely accepted the cable. Could it be that the cable is out of date?
Can someone please help me with this?
Thanks
